 |
HOTLINK II Data Card - (HL2D)
|
|
The new GRAVITY series HOTLink data cards are flexible, off-the shelf solutions for high-speed point to point data transfer using HOTLink II Fibre Channel. HOTLink II supports baud rates from 160 Mbps to 1.5Gbps and is a clear choice when efficient, low overhead protocols are desired.
The cards have a variety of applications including engineering development and factory test of HOTLink based interfaces. They also have the flexibility to be used with almost any customer defined HOTLink protocol.
|
|
FLEXIBLE BAUD RATE
|
|
Users can order cards with HOTLink
reference clock frequencies that exactly
match the baud rate of their systems.
Standard Baud Rates Include:
- 160 Mbps
- 200 Mbps
- 250 Mbps
- 400 Mbps
- 500 Mbps
- 1.000 Gbps
- 1.062 Gbps
|
|
|
FLEXIBLE CONNECTOR OPTIONS
|
The cards may also be ordered with several
connector options including, 50 Ohm,
150 Ohm differential, and fiber optic
- FO850_S/FO1310_S
- FO850_D/FO1310_D
- FCN_S
- FCN_D
- SMA
|
|
FLEXIBLE PROTOCOL
|
|
Users can also select one of the many standard protocol via software. The card is full duplex in all operational modes.
|
|
|
|
|
|
Features:
- 32-Bit/33 MHz PCI ver 2.2 Compliant
- 64-Bit/66 MHz PCI ver 2.2 Compliant
- PCI Interface will work in either +5V or +3.3V backplanes
- BNC or FCN copper
- Fibre Channel FC-0, FC-1
- Win98SE/XP/NT4/2k Drivers and support for Linux and VxWorks
|
Environmental:
- Operating Temperature:
0 to 70C (PCI) 0 to 70C (PMC)
- Relative Humidity:
5 to 95% non-condensing
- Power:
2.5A @ 5V
- Isolation:
500V at Fibre Interface
|
HL2D Resources:
HL2V Data Sheets:
- Page 1
- Page 2
HL2D Installation
HL2D Set-up and Training
| |
